Ford T5

My-WE4 · December 20th, 2011, 01:34 PM

I need a ford T5 for the RX7.. the front u-joint broke and took out the tail housing and bent the output shaft

also need a ford drive shaft so I and make a new one of those too...

...
Thanks for reading and any help/leads
Please call 252 491 5129
Chris Devlin

DT/NoTime · December 24th, 2011, 03:32 PM

Hi Chris, I'll check around for one after the Holidays. -DT

My-WE4 · December 31st, 2011, 06:53 PM

thanks DT....I located a T5, but broke MUCH more that first thought..(as you know already) took out the bell, and worst of all, broke the mounting ears off the ENGINE!!!!

I have a ranger block to replace mine.....swapped the turbo pistons into the ranger block today..new bearing and seals..short block is done....now I will do some upgrades since it's apart...

the ranger roller cam... and HD valve springs are going in the old head...plus I am looking to get rid of the distributor and go DIS...

anyway..
I have a T5 bell coming from FL so we will be rolling again soon

Thanks, Chris

My-WE4 · January 7th, 2012, 07:47 PM

anyone have a 28 spline yoke laying around???? I have a shaft, just need a yoke..
not much action here, but I thought I would try...
Thanks Chris

December 20th, 2011, 01:34 PM	#1
My-WE4 Senior Member Join Date: Sep 2007 Location: Kill Devil Hills Posts: 144 Images: 6	Ford T5 I need a ford T5 for the RX7.. the front u-joint broke and took out the tail housing and bent the output shaft also need a ford drive shaft so I and make a new one of those too... ... Thanks for reading and any help/leads Please call 252 491 5129 Chris Devlin __________________ 1987 WE4 Buick Turbo T (Original Owner) ...all apart.. 1983 RX7 Ford 2.3L Turbo-T5 5 Speed ..ON THE ROAD AGAIN 1976 Fiat Spider 124 For the wife.....PLUS, it's the beach!! we need a convertible!!!! Last edited by My-WE4; December 20th, 2011 at 01:35 PM. Reason: forgot #

December 31st, 2011, 06:53 PM	#3
My-WE4 Senior Member Join Date: Sep 2007 Location: Kill Devil Hills Posts: 144 Images: 6	thanks DT....I located a T5, but broke MUCH more that first thought..(as you know already) took out the bell, and worst of all, broke the mounting ears off the ENGINE!!!! I have a ranger block to replace mine.....swapped the turbo pistons into the ranger block today..new bearing and seals..short block is done....now I will do some upgrades since it's apart... the ranger roller cam... and HD valve springs are going in the old head...plus I am looking to get rid of the distributor and go DIS... anyway.. I have a T5 bell coming from FL so we will be rolling again soon Thanks, Chris __________________ 1987 WE4 Buick Turbo T (Original Owner) ...all apart.. 1983 RX7 Ford 2.3L Turbo-T5 5 Speed ..ON THE ROAD AGAIN 1976 Fiat Spider 124 For the wife.....PLUS, it's the beach!! we need a convertible!!!!

January 7th, 2012, 07:47 PM	#4
My-WE4 Senior Member Join Date: Sep 2007 Location: Kill Devil Hills Posts: 144 Images: 6	anyone have a 28 spline yoke laying around???? I have a shaft, just need a yoke.. not much action here, but I thought I would try... Thanks Chris __________________ 1987 WE4 Buick Turbo T (Original Owner) ...all apart.. 1983 RX7 Ford 2.3L Turbo-T5 5 Speed ..ON THE ROAD AGAIN 1976 Fiat Spider 124 For the wife.....PLUS, it's the beach!! we need a convertible!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 24th, 2011, 03:32 PM	#2
DT/NoTime Senior Member Join Date: Jun 2008 Posts: 303	Hi Chris, I'll check around for one after the Holidays. -DT